Gps etrex 30 garmin manual

manual gps etrex 30 garmin

Turn off GLONASS (GPS and Other Satellite Systems, page 6). Turning On Battery Save Mode. You can use battery save mode to prolong the battery life. NOTE. eTrex® owner's manual for use with models 10, 20, 20x, 30, 30x HomePort™, and Thumb Stick™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the For more information about GPS, go to​. This handbook is intended to provide you with a basic understanding of how your Garmin eTrex. GPS receiver (version 10, 20, or 30) can help to support your.

Also See for eTrex 30 Quick start manual - 13 pages Owner's manual - pages. Page of 60 Go. Table of Contents. Garmin eTrex 30 Quick Start Manual 13 pages. GPS Garmin etrex Manual 24 pages. Setting up a gps unit and basic gps mapping techniques manual 13 pages. Visual land owner's manual mp3 player gpsmap 6 pages. Page 2 All rights reserved.

Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. When using your device the first time, you should complete these tasks to set up the device and get to know the basic features.

Alkaline batteries can rupture at high temperatures. Creating a Waypoint You can save your current location as a waypoint. Select Mark Waypoint.

garmin gps manual 30 etrex

Page Using Sight 'n Go Waypoints, Routes, and Tracks Increasing the Accuracy of a Waypoint Location Waypoint averaging allows you to increase the accuracy of a waypoint location by collecting multiple samples of the waypoint location. Select Waypoint Averaging.

Select a waypoint.

66 Comments

Move to the location. Page Where To? Select Where To? If necessary, enter the country or state. Enter the city or postal code.

30 garmin etrex manual gps

NOTE: Not all map data provides postal code searching. Select Route Planner.

How to use the Etrex 10

Select a route. Select Edit Route. Select a point. The track log contains information about points along the recorded path, including time, location, and elevation for each point. Recording Track Logs 1.

Viewing Track Information 1. Page Navigation Navigation Navigation You can navigate a route, a track, to a waypoint, to a geocache, or to any saved location in the device. You can use the map page compass page 17 to navigate to your destination. Navigating to a Destination You can navigate to a destination using the map or compass. Before you can use the map, you must purchase and load City Navigator maps.

Page 18 Navigation You should calibrate the compass after moving long distances, experiencing temperature changes, or changing the batteries. Follow the on-screen instructions.

Navigating with the Bearing Pointer When navigating to a destination, points to your destination, regardless of the direction you are moving. Page Elevation Plot between dots on the course deviation indicator.

Navigating with the Course Pointer Before you can navigate with the course pointer, you must change the pointer setting to Course CDI page Begin navigation to a destination page Select Compass. Page Trip Computer Navigation Calibrating the Barometric Altimeter You can manually calibrate the barometric altimeter if you know the correct elevation or the correct barometric pressure.

Go to a location where the elevation or barometric pressure is known. Page Geocaches Geocaches A geocache is like a hidden treasure. Geocaching is when you hunt for hidden treasures using GPS coordinates posted online by those hiding the geocache. Downloading Geocaches 1. Connect your device to a computer page Go to www. Select items to filter.

After it is saved, the filter is automatically named. You can access the custom filter from the geocaches list. A chirp is a small Garmin accessory that you can program and leave in a geocache. Only the owner of the chirp can program a chirp, but anyone can find a chirp in a geocache. Page Applications Sending and Receiving Data Wirelessly Before you can share data wirelessly, you must be within 10 feet 3 m of a compatible Garmin device.

Select Share Wirelessly. Select Send or Receive. Setting a Proximity Alarm Walk around the perimeter of the area you want to calculate. Select Calculate when finished. Using the Calculator The device has a standard calculator and a degree calculator.

Page Setting An Alarm Applications Setting an Alarm If you are not currently using the device, you can set the device to turn on at a specific time. Select Alarm Clock.

Select the clock numbers to set the time, and select Done. Select a location. Select Use. Customizing Specific Pages Data fields display information about your location or other specified data. Dashboards are a custom grouping of data that can be helpful to a specific or general task, such as geocaching. Page Profiles Customizing Dashboards 1.

Garmin eTrex 30 Quick Start Manual

Open the page for which you want to customize the dashboard. NOTE: Changing the text language does not change the language of user-entered data or map data, such as street names. Page Setting The Device Tones Nightor automatically switches between the two based on the sunrise time and the sunset time for your current location Auto. Tracks are saved and cleared automatically based on the user setting. Changing the Units of Measure You can customize units of measure for distance and speed, elevation, and pressure.

The default coordinate system is WGS Heading Settings This function is available on the eTrex Therefore, the barometric pressure should change only due to weather.

Routing Settings The device calculates routes optimized for the type of activity you are doing. The routing settings available vary based on the activity selected.

Garmin eTrex Series – Setup – Settings & How-To Guide

Open the page for which you will restore the settings. Restoring All Default Settings You can reset all the setup values to the original settings. Page Device Information Before you can update the software, you must connect the device to your computer page NOTE: Updating the software does not erase any of your data or settings. Viewing Device Stored data is not lost when batteries are removed. Caring for the Device notice Avoid chemical cleaners and solvents which can damage plastic components.

Cleaning the Device 1. Page 44 Device Information 4.

Place the microSD card device with the gold contacts facing down. Close the card holder. Slide the card holder toward the top of the device to lock it. Replace the batteries 8. Replace the battery cover, and turn the D-ring clockwise.

Garmin eTrex 30 Owner's Manual

Page Disconnecting The Usb Cable 4. Deleting Files notice If you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted. Page Appendix Garmin dealer. Optional Fitness Accessories Fitness accessories are available for the eTrex Before you can use the This process occurs automatically when you turn on the Garmin device and only takes a few seconds when the accessories are activated and functioning correctly.

0 thoughts on “Gps etrex 30 garmin manual

Leave a Reply

Your email address will not be published. Required fields are marked *